Owner's Manual
Table Of Contents
3 Pin AUX Output Harness
1 VIOLET/BLACK
AUX
1
OUTPUT
( - )
This
wire
provides
a
(-)
300mA
output
capable
of
driving relays. For Control
of
optional
accessories
(i.e. Power Window/Sunroof, etc.).
To
activate refer to the transmitter button configuration chart. Please refer to the
selectable options for timing.
2 GREEN/BLACK FACTORY
DISARM
( - )
This
wire will supply a ( - ) 300mA pulse both upon disarming the system
and
when
the
trunk
release feature is activated. Locate the factory perimeter alarm
disarm
wire
from the key cylinder inside the drivers door.
Verification: This wire registers
ground
if
the
key is turned to the
unlock
position in the
driver's
door cylinder.
Connect
the
GREEN/BLACK
wire to the factory alarm disarm wire.
3
BROWN/BLACK
HORN
OUTPUT
( - )
8
Locate the vehicle's horn wire.
Verification: This wire will register at positive voltage and register
ground
when
the horn switch is pressed.
Connect
the
BROWN/BLACK
wire to the
vehicle's
horn wire. This is a
low
current
output,
300mA.
2010 Audiovox Electronics Corporation. All rights reserved.