Owner's Manual
Table Of Contents
Set
Up
&
Programming
Transmitter Programming - Feature Bank 1
1.
Turn the ignition
ON.
2.
Press and hold the valet/override button.
3.
Within
10
seconds the system will chirp
(3)
three times.
4.
Press 1 button
of
each transmitter you wish
to
program.
5.
The system will respond with 1 chirp for each accepted transmitter.
6.
Pressing the override button at anytime during programming will advance
to
the
next bank.
NOTE: The system will exit transmitter programming after
15
seconds of inactivity.
NOTE: This system has 1 button programming which programs all channels of the
system.
NOTE: The system will hold
up
to
4 transmitters
in
memory, programming a 5th
transmitter will erase the oldest transmitter
in
memory.
Manual Feature Programming - Feature Bank 2 & 3
1.
Turn the ignition
ON.
2.
Press and hold the valet/override button.
3.
Within
10
seconds the system will chirp
(3)
three times.
4.
Use the valet/override button to advance through each option bank. For
feature programming advance to Feature Bank 2 or
3,
which
is
(4)
four or
(5)
five
chirps.
5.
Use the transmitter
tJ
button to scroll through the selections
in
each feature
bank, the system will chirp to match the feature number.
6.
Press the transmitter
(]5)
button to change the desired feature. The LED will
flash indicating the changed feature.
2009 Audiovox Electronics Corporation. All rights reserved.
11