Owner's Manual

3 Pin AUX Output Harness
1 VIOLET/BLACK AUX 1
This wire provides a
(-) 300mA output capable of driving relays. For Control of
optional accessories
(Le. Power Window/Sunroof, etc.).
To activate refer to the transmitter button configuration chart. Please refer to the
selectable options for timing.
2
GREEN/BLACK FACTORY DISARM ( - )
This wire will supply a ( - ) 300mA pulse both upon disarming the system and
when the trunk release feature is activated. Locate the factory perimeter alarm
disarm wire from the key cylinder inside the drivers door.
Verification: This wire registers ground if the key is turned to the unlock
position
in the driver's door cylinder.
Connect the GREEN/BLACK wire to the factory alarm disarm wire.
3
BROWN/BLACK HORN OUTPUT ( - )
8
Locate the vehicle's horn wire.
Verification: This wire will register at positive voltage and register
ground when the horn switch
is pressed.
Connect the BROWN/BLACK wire to the vehicle's horn wire. This
is a low current
output, 300mA.
2009 Audiovox Electronics Corporation. All rights reserved.