User guide

640 Icon LCD Keypad 25n
8.0 Trouble Display
When your system experiences problems or is tampered with, the
trouble icon will illuminate. Most of the trouble conditions will be
programmed by your installer to be reported directly to your
monitoring station (if connected). Your keypad will only display
troubles that occur in the area(s) to which the keypad has been
assigned.
Potential troubles have been sorted into eight groups. Contact your
monitoring station in the event of an unlisted trouble.
We strongly suggest that you inform your monitoring station of
the trouble and allow them to service your system.
If your keypad is in Confidential Mode, the trouble icon will
not illuminate until you enter your user access code or press a
key, depending on how your keypad was programmed.
How do I view the Trouble Display?
1. The trouble icon illuminates.
2. Press the [] key. The trouble icon will flash and the digit(s)
representing the group heading number will appear. If there is
more than one trouble event, they will scroll.
3. Press the numerical key corresponding to the Group heading to
view the specific trouble. The condition(s) within the Group will
appear. If there is more than one condition they will scroll.
4. Press the [] key to exit.
DGP2640_EU00.fm Page 25 Friday, April 8, 2005 11:28 AM