User guide

640 Icon LCD Keypad 17n
6.2 Disarming an Armed System
You will only be able to disarm the area to which your user access
code is assigned. User access codes with the Arm Only option will
not be able to disarm the system.
You can also use a One-Touch key (see Section 5.6 on page
12) or a keyswitch (see Section 5.7 on page 13) to disarm the
area(s).
Disarming with a One-Touch key is only possible if the system
has been Stay or Instant armed.
In case of a burglar alarm, leave the premises and call your
monitoring station from a safe place.
6.3 Alarm Memory Display
Your system will record all of the alarms which occurred during the
last armed period. If an alarm was triggered in any area assigned to
your keypad, the Memory icon will illuminate.
How do I disarm the system?
1. Enter your [
ACCESS CODE].
2. Press the [] key. If you have access to more than one area,
press the number key representing the area you want to disarm
or press the [0] key for all assigned areas.
How do I disarm a system in alarm?
1. Enter your [
ACCESS CODE].
2. Call your monitoring station quickly to advise them of the alarm.
DGP2640_EU00.fm Page 17 Friday, April 8, 2005 11:28 AM