User guide

6 User Guide
of time as defined by your installer. In Confidential Mode all of the
indicator lights will turn off and the keypad will not display any zones
or status icons. Depending on how your keypad was programmed by
your installer, you must either press a key or enter your user access
code to activate Normal Mode.
2.5.2 Multiple-action
If your installer has enabled this feature, your keypad will permit you
to complete more than one action without having to reenter your user
access code. Press the [] key to exit the User Menu.
2.5.3 Display Settings
You can adjust the illumination of the LCD screen to suit your needs.
How do I adjust the display settings?
1. Press and hold the [6] key for 3 seconds. Your keypad will emit
a confirmation beep and the display options (1 to 3) will scroll.
The display option will appear on the left, while the option’s
setting will appear on the right. Press the key corresponding to
the setting you wish to modify.
• Option 1 – Adjust the scroll speed (0 is the highest, 7 is the
slowest)
• Option 2 – Adjust the backlight (0 is the lowest, 7 is the
highest)
• Option 3 – Adjust the contrast (0 is the lowest, 7 is the
highest)
2. Use the [
S] and [T] keys to increase or decrease the settings.
3. Press the [] key to save and exit.
DGP2640_EU00.fm Page 6 Friday, April 8, 2005 11:28 AM