Programming instructions

Note: Transmitters must be programmed prior to these steps.

1. Repeat steps 1-4 of Remote Transmitter Programming

(previous page).

2. Press and release the emergency override button.

The horn or siren will sound four (4) times. This indicates that the

unit has entered the Alarm Options (Option Bank 1).

3. Press the FIND/PANIC button to advance to the next feature.

The siren or horn will sound a number of times to indicate the

number of the option.

4. Press the LOCK button to turn the option on or off. The vehicle

status indicator on the dashboard indicates whether an option

is on or off.

• If the selected option is ON, the indicator will light.

• If the selected option is OFF, the indicator will turn off.

• The status indicator will turn on or off when an option is changed.

5. When changes are complete, press and release the emergency

override button to continue to the next option bank. (Siren or horn

will sound five (5) times.)

6. To reset all options back to factory defaults, press the UNLOCK

button.

Note: Installer Option bank will never reset.

7. Turn ignition off to exit programming.

See Options Chart on pages 19 - 20.

4. System Power-Up and Programming, cont’d

FIND/PANIC

Press to

Advance to Next

Setting

LOCK

Press to Turn

Selected

Feature

On /Off

UNLOCK

Press to Restore

All Settings to

Factory Defaults

C. Programming Selectable Options

CA-640.p65 10/20/03, 7:48 PM16