User`s manual
Table Of Contents
- 535 User's Manual
- Table of Contents
- Chapter 1: Introduction
- Chapter 2: Basic Interface
- Chapter 3: Installation
- Chapter 4: Hardware Set Up
- Chapter 5: Software Configuration
- Chapter 6: Tuning
- Chapter 7: Applications
- Control Type
- Alarms
- Duplex Control
- Slidewire Position Proportioning Control
- Velocity Position Proportioning Control
- Staged Outputs
- Retransmission
- Digital Inputs
- Remote Setpoint
- Multiple Setpoints
- Multiple Sets of PID Values
- POWERBACK
- Self Tune–POWERTUNE®
- Ramp-To-Setpoint
- Input Linearization
- Load Line
- Security
- Reset Inhibition
- Process Variable Reading Correction
- Serial Communications
- Cascade Control
- Ratio Control
- Appendix 1: Menu Flowcharts
- Appendix 2: Parts List
- Appendix 3: Troubleshooting
- Appendix 4: Calibration
- Appendix 5: Specifications
- Appendix 6: Glossary
- Appendix 7: Isolation Block Diagram
- Return Procedures and Warranty Information
- 500 Series Process Controllers User's Manual
535 User's Manual Chapter 6 69
Tuning
30. TRIP:3 Defines the value that triggers a change to the 3rd PID set.
31. PROP. BND.:4 Defines the proportional band for PID set 4.
32.RESET:4 Defines the integral time for PID set 4.
33. RATE:4 Defines the derivative time for PID set 4.
34. MAN. RST.:4 Defines the manual reset (or load line) for PID set 4.
35. TRIP:4 This defines the value that triggers a change to the 4th PID set.
36. PROP. BND.:5 Defines the proportional band for PID set 5.
37.RESET:5 Defines the integral time for PID set 5.
38. RATE:5 Defines the derivative time for PID set 5.
39. MAN. RST.:5 Defines the manual reset (or load line) for PID set 5.
40. TRIP:5 This defines the value that triggers a change to the 5th PID set.
41. PROP. BND.:6 Defines the proportional band for PID set 6.
42.RESET:6 Defines the integral time for PID set 6.
43. RATE:6 Defines the derivative time for PID set 6.
44. MAN. RST.6 Defines the manual reset (or load line) for PID set 6.
45. TRIP:6 This defines the value that triggers a change to the 6th PID set.
46. PROP. BND.:7 Defines the proportional band for PID set 7.
47.RESET:7 Defines the integral time for PID set 7.
48. RATE:7 Defines the derivative time for PID set 7.
49. MAN. RST.:7 Defines the manual reset (or load line) for PID set 7.
50. TRIP:7 This defines the value that triggers a change to the 7th PID set.
51. PROP. BND.:8 Defines the proportional band for PID set 8.
52.RESET:8 Defines the integral time for PID set 8.
53. RATE:8 Defines the derivative time for PID set 8.
54. MAN. RST.:8 Defines the manual reset (or load line) for PID set 8.
55. TRIP:8 This defines the value that triggers a change to the 8th PID set.