Installation guide

Operating
the 2
I
3
Hour
Start
Up Timer Mode
The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period.
This feature is especially useful in
cold
climates where the
only
means to keep the
engine and engine
fluids warm is to periodically
start the engine. The default setting is
3 hour, selection between 2 or 3 hour is made
in
option programming.
WARNING!
Be certain that the
vehicle
is outdoors before using this or any remote starting
device. A running engine produces dangerous carbon monoxide fumes which can be
harmful or fatal
if prolonged exposure occurs. DO NOT remote start the vehicle if it is
garaged.
To
begin
the
2
I
3
hour
start
up
timer
mode:
1.
Turn the vehicle's ignition
ON
then
OFF.
2.
Press and
hold
the
valet
button.
3.
Press the
0
button 4 times, the system
will;
a.
When set for 3 Hour
(default)-
flash
the parking lights 4 times.
b.
When set for 2 Hour - flash the parking lights 2 times.
4. Release the
valet
button.
To
exit
the
2/3
hour
start
up
timer
mode:
1.
Turn the vehicle's Ignition ON.
OR
1.
Activate the remote vehicle start feature using the remote control.
Using
the
~~Quick-stop"
Feature
If
you want to make a short stop and keep your vehicle running (to keep the interior
warm or cool), the quick-stop feature
allows
you to do this while keeping your vehicle
secure and your keys with you.
To
engage
quick
stop:
1.
Stop the vehicle and place the transmission in PARK.
2.
With your foot off the brake pedal, press and release the
0
button 2
times within 2 seconds. The LED
will
flash 3 times to confirm quick
stop is entered.
3.
Remove the keys from the ignition and exit the
vehicle.
Lock the
vehicle's doors
if
desired.
Note:
Do not leave children or animals unattended in the vehicle when using the
quick-stop feature.
2014
Voxx
Electronics
Corporation.
All
rights reserved.
3