Installation guide

2
Using
Your
Remote Vehicle Starter
Remote Starting Your Vehicle
The system
WILL NOT start the vehicle if any one of the
following
situations exist:
1.
The
vehicle's
hood is opened.
2.
The gear shift selector is not
in
Park.
3.
The brake pedal
is depressed.
4.
Valet Mode
is
active.
1.
To
start the
vehicle,
press and release the
0
button 2 times within 2 seconds. The
vehicle will start and remain running for the pre-programmed
5,
10,
15,
20,
45 or 60
minute
run
cycle. As a visual indication, the parking lights will flash
or remain
on
depending
on
the setting by your
installation
center.
2.
When you arrive at the vehicle, turn the ignition key to the
ON
position (Do not try to
restart the vehicle), then step on the brake pedal to disengage the remote start. The
vehicle
will
continue to run, but now
on
it's own power.
Shutting Down the Remote
Start
To
shut down the remote start feature from the transmitter press and release the
if)
button 2 times within 2 seconds.
Unlocking the Vehicle (optional)
To
unlock the vehicle's
doors press and hold the
0
button for 3 seconds anytime the
vehicle
is
remote started.
Note: Additional parts and/or labor may be necessary, see your installing
dealer for
details.
Programmed Transmitter Notification
As a security precaution each time the vehicle's ignition is turn on the status LED
light with flash the number
of
transmitters programmed into the system. This helps
to
identify unauthorized transmitters from accessing your vehicle.
If you believe
an
unauthorized transmitter has been programmed to your system, contact your
installing
dealer for assistance.
ca4054
&
4554
Owners
revA