User`s manual

51
In CMS-enabled pumps, the graphic bar will toggle with Line Pressure (“L Press”)
which displays the current patient side (downstream) pressure in the administration
set in millimeter of mercury (mmHg) units.
3 The third line displays the total volume infused and, if mg or mcg is the selected unit, this field
will toggle to display the total (mg or mcg) infused as well.
4 The last line displays the remaining time to the completion of the infusion toggled with the
remaining amount to be infused.
5 In addition to the display screen giving information regarding the status of the infusion, the
green LED light blinks whenever the pump is infusing.
The information on the run screen will alternate between a four-line display and a large-font
display of each line of information on the screen.
Continuous Information Screens
Interrupting an Infusion
The infusion can be paused at any time by pressing the “PAUSE” key. The yellow “Standby”
LED light blinks, and the following screen displays:
Pause Menu Screen
The screen offers you three options:
Continuous Therapy