User`s manual

143
Additional graphics below show how to install the Pole Clamp on the Lock Box.
Figure 10.6 Pole Clamp and Safety Shell Installation
Pump Holster (340-0111)
This accessory is a simple “slide pump in” case with a pole clamp-mounting bracket on the back,
allowing the pump to securely be mounted onto a pole and yet allow the user easy access to the
display, keypad, controls, battery compartment, and connectors for external power or
communications.
Figure 10.7 Pump “Holster”
Accessories
A
lign and slide the Lock Box
over the Pole Clamp until the
Latch is looked in place.
Press Latch
lever to release
Push and slide
Lock Box to
remove
Curlin Medical Holster
with pole mount to be
attached to an IV pole.
The back of the holster
slides onto the pole
mount and locks securely
in place