User manual

ManualsBrandsCode Alarm ManualsAutomotive4000

CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.

CONCEPT 3OOO & Access 4000. User Manual.

THE LCD TERMINAL

Default LCD Display.

The LCD Terminal offers a number of options for the Default display.

This is the display that will be shown when there are no User operations being

performed, and no Alarms or other messages to be displayed.

The Default display can be selected separately for each LCD Terminal in your system.

The settings can only be programmed by the Installer, who can also advise you on the

appropriate options.

SystemSystem

System

ReadyReady

Ready

SYSTEM READY.

If no specific Default Display option has been

chosen, this message will be displayed.

SINGLE AREA STATUS.

This option allows the name and current status of

a single Area to be displayed. This is useful when

the Terminal only provides control of one Area.

An option is also provided to allow the UP and

DOWN Arrow keys to be used to view the name

and current status of up to 8 sequential Areas.

AREA ARRAY.

The Area Array allows the current status of 8

Areas to be viewed by Area number.

n = Area Off (Disarmed)

Y = Area On (Armed)

T = Timed Off (Defer Arming timer running)

W = Defer Arm Warning. (Timer about to expire)

See “Turning Areas Off” for details of the Defer

Arming feature.

An option is also provided to allow the UP and

DOWN Arrow keys to be used to view the current

status of all Areas in the system by Area number.

i.e. Areas 1-8

V Areas 9-16

V Areas 17-24, etc.

librarylibrary

library

is Offis Off

is Off

Areas: 12345678Areas: 12345678

Areas: 12345678

001 -> YnnYnnnn001 -> YnnYnnnn

001 -> YnnYnnnn

Areas: 90123456Areas: 90123456

Areas: 90123456

009 -> nnnnnnYY009 -> nnnnnnYY

009 -> nnnnnnYY

Areas: 78901234Areas: 78901234

Areas: 78901234

017 -> nnnnnnYY017 -> nnnnnnYY

017 -> nnnnnnYY