User manual

CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.

CONCEPT 3OOO & Access 4000. User Manual.

HomeZone selection.

The display will show the name and current status

of the first HomeZone. (V3 or later only)

NOTE: Only available if the HomeZones option is

used in your system.

The <UP> and <DOWN> Arrows will search

through the named HomeZones alphabetically,

Press the <DIGIT> key that represents the first

letter of the name. (You may have to press the key

2 or 3 times to obtain the required letter.)

If the name you want is not displayed because of

other names starting with the same letter, use the

<DOWN> Arrow key to locate the name, then

press the <OK> key to proceed.

ISOLATE / DE-ISOLATE THE INPUT.

The display will now show the name and current

status of the Zone/Input .

<OFF> key to Isolate the Zone displayed. Any

Zones isolated in this way are automatically

De-isolated when the Area is next turned OFF.

<ON> key to De-isolate (or “Enable”) the Zone.

<RIGHT> arrow key to “Sticky Isolate” the Zone.

The Zone will remain isolated unless

De-isolated from the LCD Terminal via this

Menu option.

A brief message will appear on the display to

confirm that the operation was successful.

When complete press the <OK> key to return to

the “Zone to Isolate” display.

RECEPTION PIRRECEPTION PIR

RECEPTION PIR

EnabledEnabled

Enabled

Zone isZone is

Zone is

now isolatednow isolated

now isolated

Office Door ReedOffice Door Reed

Office Door Reed

EnabledEnabled

Enabled

then if required

then

or or

ISOLATE