User manual

64
CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.
CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.
CONCEPT 3OOO & Access 4000. User Manual.
, , ...
UT008 12345678UT008 12345678
UT008 12345678UT008 12345678
UT008 12345678
Rank:-> nnnnnnnnRank:-> nnnnnnnn
Rank:-> nnnnnnnnRank:-> nnnnnnnn
Rank:-> nnnnnnnn
UT008 Valid Aux:UT008 Valid Aux:
UT008 Valid Aux:UT008 Valid Aux:
UT008 Valid Aux:
:X :X
:X :X
:X
UT008 12345678UT008 12345678
UT008 12345678UT008 12345678
UT008 12345678
Auxes-> nnnnnnnnAuxes-> nnnnnnnn
Auxes-> nnnnnnnnAuxes-> nnnnnnnn
Auxes-> nnnnnnnn
USER TYPE RANKS
The display shows the current Ranks allocated.
If a User has the ability to Program/Edit Users,
they can normally assign any User Type.
When a User has Ranks programmed, they can
only access User Types that have a matching rank
set to YES. See USER RANKS in the section
“USER CODE PROGRAMMING”.
Use the <RIGHT> Arrow key, followed by the
<9> (Yes) key to assign the required Rank/s. Use
the <5> (No) key to remove a Rank setting.
<OK> for next option. <UP>/<DOWN> key to
edit this option for the previous/next User Type.
ASSIGN A VALID AUXILIARY
This display allows an optional Auxiliary output
to be specified that will turn ON whenever this
User Type uses their PIN number or Card.
Use the <DIGIT> keys to enter an Auxiliary ID.
(The <RIGHT> arrow key will need to be used
after the Module type letter is entered.)
Press <OFF> to remove an existing Auxiliary ID.
HOME AUXILIARY TYPES TO CONTROL.
The display will show the existing Home
Auxiliary Types allowed.
When Home Auxiliaries are turned ON/OFF via
the “Control Menu” (<MENU> 9 , 1.), the User
Type can only control Home Auxiliaries that have
a matching Home Auxiliary Type set to YES.
Use the <RIGHT> Arrow key, followed by the
<9> (Yes) key to assign the required Rank/s. Use
the <5> (No) key to remove a Rank setting.
<OK> key for next User Type to edit.
<UP> / <DOWN> key to edit this option for the
previous/next User Type.
NOTE: If “User Ranks” are
not used in the system, all User
Type Rank options must be left
at “No”.
, or
or or
, or
or or