User manual

CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.

CONCEPT 3OOO & Access 4000. User Manual.

EXIT USER CODE PROGRAMMING

When you have completed your programming

session, use the <END> key to exit the menu.

This can be done at any point in the procedure.

e.g. If your session only involved changing a PIN

code, you may use the <END> key after you have

entered the new PIN and pressed <OK>. This

avoids having to step through all the other options.

U00009 Bt1 Area>U00009 Bt1 Area>

U00009 Bt1 Area>

NoneNone

None

or or

When an action is selected, the <OK> key moves

the display on to one of the following four

screens.

<UP> key to edit the previous User’s “Fob Button 1

Action”. <DOWN> key to edit the next User’s “Fob

Button 1 Action”.

Press the <RIGHT> Arrow key to scroll through

Area names until the required Area is displayed.

(If you need to return to the start of the list at any

stage, press the <OFF> key)

Use the <DIGIT> keys to enter the Auxiliary ID,

Zone ID, or Area List Number.

Use the <RIGHT> arrow key to move the cursor.

Press <OFF> to remove an existing ID number.

When complete: <OK> key to move on to the

programming of the operations for Fob Buttons 2,

3 & 4, or to the next User to program/edit.

U00009 Bt1 Aux.U00009 Bt1 Aux.

U00009 Bt1 Aux.

_ :X_ :X

_ :X

U00009 Bt1 ZoneU00009 Bt1 Zone

U00009 Bt1 Zone

01:Z0101:Z01

01:Z01

U00009 Bt1 AListU00009 Bt1 AList

U00009 Bt1 AList

ALAL

0000

USER EDIT