User manual

CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.

CONCEPT 3OOO & Access 4000. User Manual.

RF FOB OPTIONS (V5.1 or later only)

If a Wireless Remote Fob has been registered to

this User, these options may be used to program

the operation of the 4 buttons available on the

Fob. See “RF Fob Registration”. MENU, 2, 7.

Press the <RIGHT> Arrow key to scroll through

the Fob Button action options until the required

action is displayed. (If you need to return to the

start of the list at any stage, press the <OFF> key)

U00009 Fob Btn1>U00009 Fob Btn1>

U00009 Fob Btn1>

NoneNone

None

NOTES:

1) Consult the Installer to determine the Fob operations available in your system.

2) These User programming options are only available to the “Installer” (U00001) &

“Master” (U00002) Users.

3) See “Wireless Remote Fob Operations” for User instructions and to record the Fob

button operations.

Area On * The nominated Area will be turned On.

Area Off * The nominated Area will be turned Off.

Aux On * The nominated Auxiliary will be turned On.

Aux Off * The nominated Auxiliary will be turned On.

Toggle Aux * The state of the nominated Auxiliary will be toggled.

(i.e. Turned On if currently Off, or turned Off if currently On)

Zone Alm An Alarm will be generated on the nominated Zone

Zone Alm (Q) An Alarm will be generated on the nominated Zone, but only if the

“Qualify Auxiliary” is On. See “Qualify Auxiliary” below.

Area List On * The nominated Area List will be turned On.

Area List Off * The nominated Area List will be turned Off.

Qualify Aux * The nominated Auxiliary will be turned On for 10 Seconds to

Qualify the “Area On”, “Area List On” & “Zone Alm (Q)” actions.

* NOTE: Area or Auxiliary Fob operations are only allowed if the “F” option (Allow

Fob) is set to Yes in the “.FdDUAPC” screen in the User’s “User Type”.

BUTTONS: 1 2 3 4