User manual

CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.

CONCEPT 3OOO & Access 4000. User Manual.

SELECT “USER CODES”.

SELECT A USER TO PROGRAM/EDIT.

The display will first allow you to choose a User

number to alter. (Method i)

Pressing the <ON> key will allow an existing User

to be selected by name.

(Alpha-search - Method ii)

In either mode, the <UP> and <DOWN> Arrows

will search through the User numbers/names.

i) <DIGIT> keys are used to enter a User number,

ii) When searching for a particular User name, press

the <DIGIT> key that represents the first letter of

the name. (You may have to press the key 2 or 3

times to obtain the required letter.)

If the User you want is not displayed because of

other names starting with the same letter, use the

<DOWN> Arrow key to locate the User’s name.

When the desired User number or name is located,

press the <OK> key to proceed with editing.

NOTE: Use the <END> key at any time to save the

current setting and Exit User programming.

USER NAME.

The display will show the User number and name.

To enter a new name press the <OFF> key to clear

the screen, then use the <DIGIT> keys to program

the name. Up to 16 characters of text can be entered.

To modify an existing name, use the <LEFT> and

<RIGHT> Arrow keys to position the cursor under

the letter to be changed, and then use a <DIGIT>

key to enter the new letter.

User toUser to

User to

alter: Ualter: U

alter: U

00250025

0025

Find User Name ^Find User Name ^

Find User Name ^

AliceAlice

Alice

User 00009 Name:User 00009 Name:

User 00009 Name:

TravisTravis

Travis

, - - -