User manual

CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.

CONCEPT 3OOO & Access 4000. User Manual.

VIEW INPUT STATES

The system can be programmed to allow Users to

view a summary of specific Zones that are enabled

and currently in an abnormal condition.

“INPUT STATES” can then be used to display the

summary. (V3 or later only)

You may need to use this function when the LCD

Terminal displays a message such as:

“Some Inputs are Tampered”

“Some Inputs are Isolated”

etc.

The display will show the first Zone that is in an

abnormal state.

The summary is prioritised in the following order:

1) Isolated Inputs

2) Tampered Inputs

3) Unsealed Inputs

The <DOWN> arrow key can be used to scroll

through the list of other abnormal Zone states.

When the bottom of the list is reached, the display

will show “Finished Check” to indicate that there

are no more abnormal Zones to view.

Press the <END> key to exit to the normal

display.

Unsealed Input:Unsealed Input:

Unsealed Input:

Teller Area PIRTeller Area PIR

Teller Area PIR

Isolated Input:Isolated Input:

Isolated Input:

CustomerArea PIRCustomerArea PIR

CustomerArea PIR

FinishedFinished

Finished

CheckCheck

Check

REMEMBER !! Any time you need it,

is as close as the press of a key.

IMPORTANT NOTE: This

operation is replaced by the

“Clear Trouble Zones”

operation in some European

countries (e.g. UK).

See next page for details.