User manual

22
CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.
CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.
CONCEPT 3OOO & Access 4000. User Manual.
An Alarm message may be displayed on the Terminal
indicating which Area the Alarm has occurred in.
Logon to the Terminal as described before.
(PIN code + <OK>)
The display will show the specific details of the
Alarm and provide a scrolling message if more than
16 characters.
e.g. “Had Alarm on FRONT DOOR in FOYER”
Note alarm details, then press the <OK> key to
acknowledge the message. If there are other Areas
that have had an alarm, the next Area Alarm message
will be displayed until all Area Alarm messages have
been acknowledged.
The display will then show the Area ON/OFF
message to allow you to continue with your
operation. e.g. Turn the Area OFF.
** Area Alarm **** Area Alarm **
** Area Alarm **** Area Alarm **
** Area Alarm **
Had Alarm on PIRHad Alarm on PIR
Had Alarm on PIRHad Alarm on PIR
Had Alarm on PIR
Had Alarm inHad Alarm in
Had Alarm inHad Alarm in
Had Alarm in
ROBYNS OFFICEROBYNS OFFICE
ROBYNS OFFICEROBYNS OFFICE
ROBYNS OFFICE
Alarm messages must be acknowledged by a User with the appropriate authority. These
messages provide precise information of the type of alarm, the Area it has occurred in,
and the Zone or System Input that generated the alarm.
- ,
Acknowledge an Alarm.