User manual

102

CONCEPT 3OOO & Access 4000.CONCEPT 3OOO & Access 4000.

CONCEPT 3OOO & Access 4000. User Manual.

Wireless Remote Fob Operations.

Some sytems may utilize 4-Button Wireless Remote Fobs to perform Area control,

Auxiliary control, and Alarm functions. Any Fobs to be used in the system must first be

enrolled by being registered to individual Users. See “RF Fob Registration”, MENU,

2, 7.

The Fob button functions are then defined in User programming. For ease of operation,

Fob functions will normally be programmed to be similar for all Fob Users in the same

system. However, as the system allows the function of each button to be individually

programmed for each User, the system also offers the flexibility for different Fob functions

to be defined for different Users. See “User Programming”, MENU, 2, 1.

In consultation with your Installer, use the following pages for planning and

recording the Fob button operations for your system.

Fobs can be programmed to perform the following operations:

Single button Arming. A single button is used to Arm one or more Areas.

Two button Arming. A “Qualify” button must be pressed, followed by the

Arm button within 10 Seconds.

Single button Disarming. A single button is used to Disarm one or more Areas.

Auxiliary On. A single button is used to turn an Auxiliary On.

Auxiliary Off. A single button is used to turn an Auxiliary Off.

Auxiliary Toggle. A single button is used to change the state of an

Auxiliary.

Single button Zone Alarm. A single button is used to generate a Zone Alarm

(e.g. Panic, Duress, Medical Alert, etc).

Two button Zone Alarm. A “Qualify” button must be pressed, followed by the

Zone Alarm button within 10 Seconds.

Fob User feedback options.

The system can provide the following standard Fob feedback options to control

Indicator or Warning devices such as Sounders, Lamps, Sirens or Keypad beepers.

Area is turned On (Armed) Trigger an Auxiliary output for 2 Seconds.

Area is turned Off (Disarmed) Trigger an Auxiliary output for 5 Seconds.

Area Fails to Arm Trigger the Siren, and/or another Auxiliary output for

approximately 5 Seconds.