System information

ATS2000/3000/4000/4500 Programming manual
96
Tz 1.1 Start
–
08:00 End
–
00:00
Start Hours:
Tz 1.1 Days: --,Mo,Tu,We,--,--,--,Hol
(1)Sun-(8)Hol:
Timezones
Timezone No:
Tz 1.1 Start
–
08:00 End
–
00:00
Start Mins:
Tz 1.1 Start
–
08:00 End
–
00:00
End Hours:
Tz 1.1 Start
–
08:00 End
–
00:00
End Mins:
13.1. Select timezone
First select the timezone to program (1 – 24).
 How to program timezones
Press one of these keypad buttons to:
[MENU*] Skip this timezone.
? [ENTER] Enter a new value.
[ENTER] Save the time values displayed and move to the days
display.
 If you only want to change one of the time values (e.g. change end time from 17:30
to 18:30), you must re-enter each time value.
13.1.1. Program start time, hours.
First program the hour for starting time for the timezone, sub-timezone 1.
13.1.2. Program start time, minutes.
Enter the minutes for the starting time for the timezone, sub-timezone 1.
13.1.3. Program end time, hours.
Program the hours for this sub-timezone to end the valid period.
13.1.4. Program end time, minutes.
Finally, program the minutes for this timezone to end the valid period.
13.1.5. Days
Once you have entered the valid time period for the sub-timezone, the next display that
appears lets you enter the days of the week and holidays on which the timezone is valid.
For the days of the week, enter their numerical value, where Sunday is “1” and holiday is
“8”.
 The next displays contain sub-timezones 1.2 – 1.4. These are programmed in the
same way as sub-timezone 1.