System information

ATS 2000/3000/4000/4500 Programming manual 87
NO
–
Disable Reporting Inhibits
*-Change 0 - Skip
X
SIA Max. Characters
*-Change 0 - Skip
X
25 Account Code
Acc. Code:
X
25 Line type - 0
Value:
NO
–
Suppress FTC for voice reporting
*-Change 0 - Skip
NO No audio listen in allowed
 Press 0 to skip further options and move to central stations.
9.17.9. Disable reporting of inhibits
Specify if this central station can be used to report inhibits.
YES Reporting of inhibits is disabled.
NO Inhibits will be reported.
 Press 0 to skip further options and move to central stations.
9.17.10. Reserved
9.17.11. X-SIA Max Characters
Specifies the maximum number of characters for XSIA. This option tells the panel to send
either MAX the first 16 or MAX the first 30 characters to the CS.
9.17.12. X25 Account Code
This is the account code for X25 protocols. Max: 8 digits
Sets the polling time of the line.
0 - Permanent 15 minutes polling
9.17.13. X25 Line type
Sets the polling time of the line.
0 - Permanent 15 minutes polling
1 - Permanent 90 seconds polling
9.17.14. Connection type
0 PSTN
CS reports via the on board PSTN dialler
1 ISDN
CS reports via the plug-on ATS7100 ISDN dialler
2 ISDN - D
CS reports via the plug on ATS7110 ISDN dialler
3 GSM
CS reports via the plug on ATS7300 GSM dialler
4 Universal
Interface
CS reports via the ATS1801 and the plug on ATS1806 IP
interface (to OH Digital Receiver)
9.17.15. Suppress FTC For Voice Reporting
Suppresses Report Fail (FTC) messages and Fault LED on the RAS for when the panel
fails to complete voice message delivery only. The “'VOICE i/f fail” message, caused by
hardware failure when the panel is unable to communicate with the ATS7200 board, is
not suppressed by this option. The FTC will still be LOG.