System information

ATS2000/3000/4000/4500 Programming manual
84
Central Station 1..4
CS No:
Disabled
Format No:
X
25 TEI Value
Value:
A
udio Listen In Time - 180
Time:
A
udio Listen In Frame Time - 30
Time:
YES – Enable GSM Line Fault Monitoring*-
Change 0-Skip:
YES – Report Mains fault?
*-Change 0-Skip
YES – Report Line fault?
*-Change 0-Skip
9.11. X25 TEI Value
The X25 TEI value for the ISDN-D channel connection. The range is from 1 to 63.
9.12. Audio listen-in time (sec.)
The total time in secs that the panel will transmit audio to the monitoring station. Note that
the actual time of the audio transmission can be manually stopped or extended by the
receiver. Range 10 –255secs
9.13. Audio listen-in frame (sec.)
The time in secs for each audio frame. During transmission the audio is broken into
frames or blocks. Range 10 – Audio Listen In Time.
9.14. Report mains fault
Setting is ignored if “Enable Buzzer on Mains/Line Fault” menu is set to YES in System
Options.
YES By default for Ireland.
NO All other languages (countries) except Ireland.
9.15. Report line fault
Setting is ignored if “Enable Buzzer on Mains/Line Fault” menu is set to YES in System
Options.
YES By default for Ireland.
NO All other languages (countries) except Ireland.
9.16. GSM Line Fault
This menu’s setting “Enable GSM Line Fault Monitoring”
9.17. Select the central station to
program
Enter the central station to program.
9.17.1. Select the reporting format
Every central station can report using a different format. There are 14 reporting formats
available: