System information

ATS2000/3000/4000/4500 Programming manual

*-Pause, Ph No:

PABX:

*-Pause, Ph No:

MSN No:

–

DTMF Tone Dialling

*-Change 0 - Skip

9. COMMUNICATION OPTIONS

This menu is used to program all system-wide communication options.

9.1. PABX number

A PABX number hold a number that precedes any other number being dialled. Used only

if the dialler is connected via a PABX to the telephone network.

 How to program a telephone number

Press one of these keypad buttons to:

? [ENTER] Enter the telephone number.

[MENU*] Insert a pause or “T” in the telephone number.

[MENU*][MENU*][ENTER] Clear the telephone number

[ENTER] Save and display the number.

9.2. MSN Number

For ISDN dialler, a MSN number can be programmed. This number is sent to the ISDN

network on dialling to a computer or central station.

See PABX number (above)

MSN may not contain characters P and T, but only digits between 0 and 9.

9.3. Dial tone detection

This option allows you to select the type of dial tone detection: “disabled”, “CTR21”,

“Netherlands”, “UK” and “Other”.

If dial tone detection (DTD) is not disabled then:

1. at the beginning of dialling process, or

2. after dialling PABX number, or

3. When a ‘ * ’ (star) character is spotted in the dialled number,

the dial tone detection will take place.

9.4. Select tone dialling

Select tone or pulse dialling. For ISDN diallers, this option has no meaning.

YES Use tone dialling.

NO Use pulse dialling.