System information

ATS2000/3000/4000/4500 Programming manual
74
NO
–
Display User Flags
*-Change 0 - Skip
NO
–
Delayed Disarmed Alm Lockout
*-Change 0 - Skip
NO
–
Zone Expansion Fitted
*-Change 0 - Skip
3. Minimum PIN code length is set to 5 digits.
YES Financial options enabled
NO Normal operation.
 Press 0 to skip further options and leave system options.
7.26. Display user flags
Enable the special user flags to be displayed when programming users. The special user
flags are Two Card function, Guard, Visitor, Trace User, Card only, Privileged and
Extended Access.
YES The special user flags are displayed in sequence after the "Floor group" display
when programming users.
NO The special user flags are not displayed.
 Press 0 to skip further options and leave system options.
 See also the manager guide for more information on users and user flags.
7.27. Delayed disarmed alarm lockout
This is only applicable to latching delayed disarmed alarms. If set to YES, an alarm can
only be cancelled if the zone is in normal state. Therefore a latching disarmed alarm is
LOCKED OUT until the alarm device is taken out of its latched state (reset).
YES Delayed disarmed alarms are locked out until the alarm device is reset (and the
zone has switched to normal state).
NO Normal operation. Delayed disarmed alarms are not locked out.
 Press 0 to skip further options and leave system options.
7.28. Zone expansion fitted
Indicate if zone expanders (ATS1202) are fitted on the control panel (not for ATS1201
DGP).
YES Zone expanders are fitted on the control panel.
NO No zone expanders fitted.
 Press 0 to skip further options and leave system options.
 See the installation guide for information on fitting zone expanders on the control
panel.