System information

ATS 2000/3000/4000/4500 Programming manual 61
A
lm/Grp Restr.1 Disarmed is (Min). 0
Time:
A
lm/Grp Restr.2 Disarmed is (Min). 0
Time:
A
lm/Grp Restr.3 Disarmed is (Min). 0
Time:
A
lm/Grp Restr.4 Disarmed is (Min). 0
Time:
6. TIMERS
Program all system wide timers in this section.
!
Timers are accurate on +/- 1 of the value entered. So a timer set for 20 seconds, will
end somewhere between 19 and 21 seconds. Consequently, avoid using values of 1
second or 1 minute.
If a timer is set to 0, that timer will not be used.
6.1. Alm/grp restriction 1 disarmed
time
You need to program the individual times (from 0 to 255 minutes) for each alarm group
restriction 1 to 7 for the time it is disarmed. The alarm group restriction has to be
programmed for timed disarm and be assigned to an alarm group.
 If set to 0 , the area(s) will not re-arm automatically. See Alarm group restrictions
on page 98 for more information.
 The alarm group restriction time will be over-ridden by the Area disarmed time (if
programmed) in the Area database (page 36).
6.2. Alm/grp restriction 2 disarmed
time
See Alm/grp restriction 1 disarmed time.
6.3. Alm/grp restriction 3 disarmed
time
See Alm/grp restriction 1 disarmed time.
6.4. Alm/grp restriction 4 disarmed
time
See Alm/grp restriction 1 disarmed time.