System information

ATS2000/3000/4000/4500 Programming manual

lm-Grp 14 Timezone 4

Timezone:

Grp 14 Alt-Grp 12 - Night Shift

Alm-Grp:

User menu options

3. Zones In Alarm 15. Time & Date

4. Inhibited Zones 16. Inhibit/Uninhibit RAS/DGP

5. History 17. Enable/Disable Service Tech

6. Test Report 18. Reset Cameras

7. Service Menu 19. Installer Programming

8. Film Counters 20. Door and Floor Groups

9. List Zone Names 21. Holidays

10. Inhibit Zone 22. Open Door

11. Uninhibit Zone 23. Unlock, Lock, Disable and Enable

12. Test zone 24. Print History

See the Manager’s manual for further information on each option.

 Press 0 to go to timezone.

5.1.27. Timezone

Determines the timezone that applies to this alarm group. The alarm group is only

available if the timezone is valid.

For information on operating timezones, see Timezones (page 95), and Timezone to

follow output (page 115).

5.1.28. Alternate alarm group

You can program each alarm group to have an alternate alarm group. The alternate

alarm group is used whenever the original alarm group is disabled due to an invalid

timezone. The alternate alarm group can have other areas or menus as the original alarm

group.

Example:

During normal working hours, users can arm and disarm from a list. After hours, only

arm/alarm reset is allowed without presenting a list of areas.

 The alternate alarm group can also be programmed with an alternate alarm group

and so on - up to three alarm groups (the original plus two alternates). If a function

is denied by the timezone of one alarm group, the next will be checked, etc.

 When alternate alarm groups are active and these have alarm group restrictions,

the alternate alarm group restrictions apply. See also Alarm group restrictions on

page 98.