System information

ATS 2000/3000/4000/4500 Programming manual 59

PIN Codes Can Not Be Displayed

Code: 1234

Confirm PIN Code:

Code:

PIN Code: 1111:

Code: 1234

PIN Code: 1234:

Code:

es - 1-Panel Status

*-Change 0 - Skip:

The user can change the code again, or press Enter to exit.

If the new “Change own PIN only” option is set to YES and if the System Option

“DISABLE PIN CODE FROM DISPLAYING “ is set to YES, then the display will show the

following:

The user can then enter his new PIN code and will be asked to confirm

The user can change the code again, or press Enter to exit.

5.1.26. Allow Stop Voice reporting

The authorisation for the user to have the ability to stop voice reporting is selectable via

the RAS’s assigned alarm group upon disarming.

YES User is allowed to stop the voice reporting (in most cases on areas assigned to

the RAS in use.)(Note: Only if the user has a valid alarm group).

NO The user is not allowed to stop the voice reporting.

 Press 0 to go to the user menu items available.

User menu options

Determines if the user menu item is available in this alarm group to users or RAS’s.

Each user menu is displayed and must be set to YES for it to be available to the alarm

group. The user menus available for selection are:

Table 6: User options available

User menu options

1. Panel status 13. Start Auto Disarm test

2. Active Zones 14. Program Users