System information
ATS2000/3000/4000/4500 Programming manual
58
No
–
No Arming If Restr. Not Timing
*-Change 0 - Skip:
NO
–
User Has Alm/Grp Restr 8 - Counter
*-Change 0 - Skip:
NO
–
Change own PIN only
*-Change 0 - Skip:
PIN Code: 1111
Code:
PIN Code: 1111
Code: 1234
PIN Code: 1234
Code:
5.1.23. Alarm group restriction 8 - Counter
Operates as alarm group restriction 1, but on disarming it will increase a counter. When
the area is armed using this alarm group it will decrease the counter. When the counter
reaches 0, it will arm the areas in the alarm group.
YES The alarm group restrictions are activated.
NO The alarm group restrictions are not activated.
Press 0 to go to the user menu items available.
See also Alarm group restrictions on page 98 and Alarm group restriction 1.
5.1.24. No arming if alarm group restriction not timing
Prevents the alarm group restriction timer to arm the areas if a user without restriction has
disarmed the areas.
YES If an area has been disarmed and there is no alarm group restriction timer
running, an alarm group restriction timer cannot be started.
When an alarm group restriction timer expires, it arms the area. By setting this
option you prevent an area from being armed if a user without alarm group
restriction originally has disarmed it.
NO Normal alarm group restrictions apply.
Press 0 to go to timezone.
5.1.25. Change own PIN code
Allows the user (if he has access to Menu 14- program users) to change his own PIN
code. All other menus of Delete, Display and Create will be absent. The user cannot see
nor display even his own Alarm Group, Door Group, Floor Group or User name.
YES The user can change his own PIN code
NO The user can change the PIN codes of other users and can access the Menu
14 menus of Delete, Display and Create
If the “Change own PIN only” option is set to YES and if the System Option “DISABLE
PIN CODE FROM DISPLAYING “ is set to NO, then the display will show the following, if
1111 is the actual pin code.
The user enters his new PIN code
Followed by entering: