System information

ATS2000/3000/4000/4500 Programming manual
48
NO
–
A
TS1151/56 RAS
* - Change 0 - Skip
NO
–
CARD & PIN (Disarm Only)
* - Change 0 - Skip
RAS Tamper (ACPO) Area 1
Area:
Menu 3-Valid Card Flash: Flash Disabled
Menu 4-Night Light: Night Light Disabled
3.2.19. ATS1151/56 RAS
YES Allows configuration of different actions if the RAS is an ATS1151/56.
NO Only event reported. The RAS will be available.
The panel is not currently able to discriminate if an ATS1190/92 or ATS1151/56 type RAS
is in use by polling the device.
3.2.20. CARD & PIN (Disarm Only)
YES Both card AND PIN are required to disarm the system.
NO The system will disarm with CARDd OR PIN
The panel is not currently able to discriminate if an ATS1190/92 or ATS1151/56 type RAS
is in use by polling the device.
 The default is set to NO.
 A new timer option is added to Menu 6 to set the CARD & PIN Time Out.
3.2.21. RAS Tamper (ACPO) Area
Allocates the RAS to an area for alarm and tamper.
 The default is set to Area 1.