System information

ATS2000/3000/4000/4500 Programming manual
44
NO
–
Code ENTER Toggles Area Status
* - Change 0 - Skip
Table 3: Programming the arming stations
Arming stations
Programmable function
ATS 1100 ATS 1105 ATS 1150
/ 1155
ATS1170
3.2.5 LCD arming station Y Y N N
3.2.6 Toggles area status N N O* O
0 ENTER key opens door only O O O N
3.2.8 Door event flags on alarm
codes
O O O N
3.2.9 Display shunted zone on
LCD
O O N N
3.2.10 Arm/disarm using one key O# O# N N
3.2.11 Cards auto disarm N O N O
3.2.12 Card always arms/disarms N O N O
3.2.13 Reset from RAS without
code
O O O N
3.2.14 Alarm group restrictions to
disarm only
O O O O
What the codes in Table 3 mean:
Y Must be set to YES
N Must be set to NO
O Optional
* The "Toggles area status" option is NOT recommended
# CAUTION! If a LCD arming station is used as master; and "Arm Using One Key" is
set to YES; the system must be programmed so that areas 9 to 16 can never be
armed
3.2.6. Toggle Area status
Toggle area status provides users with an option to have arm control on keypads
combined with readers.
YES The [ON] and [OFF] keys have lost their function. For arm control one needs to
enter the user code followed by [ON], [OFF] or [ENTER]. If a list of areas
appears, pressing the area number and [ENTER] toggles the status of the
area. If no list is available, the status of the area(s) is toggled immediately.
NO Normal alarm control.
 Do not use this option if ENTER is set to YES.
 Using this option is not recommended.
See Table 3 on page 44 for further information on options available to arming stations.
See Table 4 (below) for information on using card readers for alarm control.