System information

ATS 2000/3000/4000/4500 Programming manual 37
A
rea 1 Disarmed No Event Flag
Event Flag:
A
rea 1 Active No Event Flag
Event Flag:
A
rea 1 External Siren Event Flag
Event Flag:
A
rea 1 Internal Siren Event Flag
Event Flag:
Each area can be programmed with one entry time. The entry times apply to zone types
3, 4, 13, 14, 41 and 42 (all entry/exit or access). The entry time however can only be
started with zone types 3, 13, 41 and 42 (entry/exit).
Behind the area number, a number and an ‘I’ or ‘O’ can show up, in case an entry (I) or
exit (O) time is running. The number indicates the seconds left to leave the area.
The entry timers can be programmed from 0 – 255 seconds.
 If zones are assigned to more then one area, the longest entry and exit time is
used. See Zone database on page 17.
2.1.4. External siren event flag
Areas are capable of triggering event flags. Different from event flags in the zone
database, these event flags are triggered by an area event, not from a particular zone
event.
The External siren event flag is triggered if any zone with the External Siren Event flag
set to YES generates an alarm. Each area can have it’s own external siren, using
different event flags for each area. See Event Flags.
2.1.5. Internal siren event flag
Areas are capable of triggering event flags. Different from event flags in the zone
database, these event flags are triggered by an area event, not from a particular zone
event.
The Internal siren event flag is triggered if any zone with the Internal Siren Event flag set
to YES generates an alarm. Each area can have it’s own internal siren, using different
event flags for each area. See Event Flags.
 The default value for this option is 13.
 Event number 1 is now the default external siren event flag. Event number 13 was
the ‘Disarmed Alarm’ but is now the ‘internal siren event flag’, the description being
similar to event number 1.
2.1.6. Area disarmed event flag
Active when the area is disarmed.
See also Internal/External Siren Event Flag (page 32).
2.1.7. Area active event flag
Used to indicate if any zone in the area is active, excluding zones that can be used to
change the status of an area, that are used for camera’s or that are of zone type Unused.
See also Internal/External Siren Event Flag (page 32).