Manualshelf

System information

ManualsBrandsCode Alarm ManualsAutomotive4000
31323334353637383940
ATS2000/3000/4000/4500 Programming manual
36
A
rea Name: 0260, Workshop
Text No:
A
rea 1 : > Exit-Time 60 Entry Time 30
Exit time:
A
rea Database
Area No:
A
rea 1 : > Exit-Time 60 Entry Time 30
Entry time:
2. AREA DATABASE
Each area can be programmed with a number of options, like the area name, entry- and exit
times, event flags etc. Before going any further, select the area to program.
2.1. Select the area to program
Enter the area number to program
2.1.1. Area name
Every area can be programmed with a name to identify the area.
The words are selected from a list already held by the ATS system. They can be either
from the list of standard words available (see the library on page 90), or from a list of
words that you have programmed yourself (see Program text on page 89).
The display shows the current area name, preceded by its reference number.
How to program a name
Names are programmed using the reference number that identifies a word.
Once the reference number is entered, the name is visible behind the
number.
2.1.2. Exit time
Every area has it’s own exit timers. Exit timers allow users that arm an area, to leave the
premises without generating an alarm (using access or entry/exit zones). Only after the
exit timers have expired, an alarm can occur.
Each area can be programmed with one exit time. The exit times apply to zone types 3,
4, 13, 14, 41 and 42 (all entry/exit or access). The entry time however can only be started
with zone types 3, 13, 41 and 42 (entry/exit).
Behind the area number, a number and an ‘I’ or ‘O’ can show up, in case an entry (I) or
exit (O) time is running. The number indicates the seconds left to leave the area.
The exit timers can be programmed from 0 – 255 seconds.
If zones are assigned to more then one area, the longest exit time is used. See
Zone database on page 17.
2.1.3. Entry time
Every area has its own entry timers. When entering the premises via a entry/exit zone,
the entry time starts. A user can disarm the area while the entry time is running without
generating an alarm.