System information

ATS2000/3000/4000/4500 Programming manual
34
NO
–
Print Zone When Active
* - Change 0 - Skip
NO
–
Camera Event, Program in Area DB
* - Change 0 - Skip
1.1.27. Trigger event flag 9, armed alarm
See Trigger event flag 2, armed alarm.
1.1.28. Trigger event flag 10, armed alarm
See Trigger event flag 2, armed alarm.
1.1.29. Trigger event flag 11, armed alarm
See Trigger event flag 2, armed alarm.
1.1.30. Trigger zone event flag when active
YES The zone event flag is triggered when the zone is active, regardless of the
status of the area(s) assigned to the zone
NO The zone event flag is only triggered when the zone generates an alarm.
See also Zone Event flag(page 31).
1.1.31. Trigger camera event flag in area DB
YES The camera event flag programmed in the area database is activated
whenever the zone generates an alarm and the area is disarmed.
NO Camera event flag will not be triggered.
 If the camera event flag is to operate, you must also program the camera event
flag number in the area database for each of the areas that have cameras and that
are assigned to the zone. Refer to Area database (page 36).
To activate the camera event flag when the area is armed, set Make all events 24
hour to YES.
See also Zone Event flag(page 31).
1.1.32. Print zone when active
YES Activation of the zone has to be printed or sent to a computer
NO Activation does not have to be printed or sent to a computer
 How to program
See How to program, page 16, for information on which keys to use.
NO - Event Flag 9, Armed Alarm
* - change 0 - Skip
NO - Event Flag 10, Armed Alarm
* - change 0 - Skip
NO - Event Flag 11, Armed Alarm
* - change, 0 - Skip
NO
–
Trigger Zone Event Flag if Active
* - change, 0 - Skip