System information

ATS2000/3000/4000/4500 Programming manual
178
area out of hours, 39
assign to alarm group, 58
auto arm/disarm, 104
available to 4-door/4-lift DGP's, 113
controlling an output, 103
hard timezones, 93
number, 94
operation during holidays, 93
program end time, 94
program start time, 94
selecting days of week and holidays, 94
soft timezone, 113
soft timezones, 93
timezone 25 (service tech enabled), 93
To remote devices, 117
Troubleshooting, 159–65
ATS1802 printer interface, 163
data gathering panels (ATS1201/1210, 162
LCD arming stations (ATS110x, ATS112x), 160
LED arming stations (ATS115x), 161
output devices (ATS181x, ATS1820), 165
Up/Download. See Computer connection
User
adding digits to code for alarmcontrol, 66
alarm group restrictions, 96
disable user codes from displaying, 70
display user flags, 71
display zones with zone names, 67
enable user name prompt, 68
no arming possible, 56
program menu options, 56
selecting options, 56
two users needed before programming codes, 70
User offset, 74
Vaults, 69
Version, 92
how to get version numbers, 92
Voice, 142
Voice reporting, 141
reporting code numbers, 141
voice message number, 142
Word library, 87
X25 Account Code, 85
X25 Line type, 85
X25 TEI Value, 82
X-SIA Max Characters, 85
Zone database, 16
alarm group, 29
allow zone inhibit, 28
area, 28
camera count zone types and film level, 64
common area, 29
define the end-of-line resistor used, 74
engineer reset (alarm), 28
engineer reset (tamper), 27
entry/exit time, 35, 36
event flags activated by zones, 30
keypad buzzer, 31
make event flags 24 hr, 32
print on activation, 34
specify reporting class database, 136
test procedure for zones, 29
trigger camera event flag, 34
trigger zone event flag, 33
using Audio Listen-in, 27
zone name, 16
zone number, 16
zone type, 17
Zone number
description, 16
Zone shunts, 109
cancel door event flag, 111
door open command starts shunt, 111
door shunted when disarmed, 111
door shunted while armed, 111
entry/exit shunting, 112
program the output to start the shunting, 110
program the time to shunt, 110
program the warning time, 110
program zones to shunt, 109
report door open/close, 112
shunt event flag, 110
shunt timer number, 109
shunt warning event flag, 110
zone holds event flag for two seconds, 112
Zone type
armed/disarmed, 17
entry/exit time, 17
programming, 17
tamper alarm, 17
Zones.
See Zone Database
armed/disarmed, 17
entry/exit time, 17, 35, 36
number, 16
shunt, 109
tamper alarms, 17