System information

ATS 2000/3000/4000/4500 Programming manual 173
INDEX
200 Baud Reverse Area armed/disarmed, 81
4-door DGP
set type of DGP, 48
4-lift DGP
set type of DGP, 48
ACPO 2002, 76
Active zones
arming with active zones, 54
Alarm A event flag, 39
Alarm B event flag, 39
Alarm control
restrict to arm/reset, 53
Alarm group restrictions, 96
alarm groups, 49
area disarmed time, 39
assign to alarm groups, 55
disable auto insert, 69
disarmed time, 59, 98
name, 98
no arming if no disarmed timer running, 56
no restriction assigned, 97
number, 98
only allow disarm on RAS, 47
operation of arm/reset, 97
operation of restriction 7 - emergency, 97
operation of restriction 8 - counter, 97
operation of timed disarm, 96
operation of timed disarm and arm/reset, 97
program alternate arm/reset, 101
program alternate timed disarm, 99
program arm/reset, 99
program timed disarm, 98
reporting emergency, 96
used for counting, 96
used with auto arm/disarm, 104
using vaults, 106
warning time, 61, 98
Alarm groups, 49
accessing panel via dial-up modem, 54
activating keypad duress with a code, 52
alarm group restrictions, 96
alternate alarm groups, 58, 99
areas, 49
arming and reseting only, 49
arming station alarm group, 49
assign restrictions, 55
assigning an alarm group to a user, 51
assigning areas, 51
assigning control functions, 51
assigning to arming stations, 42
auto inhibit active zones, 54
auto reset alarms, 79
auto uninhibit on disarm, 67
default settings for alarm groups, 50
disabling auto uninhibit function, 53
forced arming, 54
important issues, 49
name, 51
no arming if no disarmed timer running, 56
not available to user, 51
number, 50
only available at certain periods, 58
prevent forced disarming, 54
program an alarm group, 49
reseting latching system alarms, 52
restrict alarmcontrol to disarm only, 53
restrict alarmcontrol to reset only, 53
restricting alarmcontrol to arm/reset, 53
restriction with emergency alarm, 56
restrictions only allow disarm on RAS, 47
restrictions operating as counter, 56
show list of areas when arming/disarming, 52
timed disarm, 49
timezone, 58
timezones, 49
used to auto arm/disarm, 104
user menu options, 56
what is an alarmgroup, 49
Zone Database, 29
Alarmcontrol
alarm group restrictions, 96
arm with active zones, 54
auto arm/disarm, 104
cards always arm/disarm, 46
cards auto disarm, 46
combining access control and alarmcontrol, 66
common areas, 107
entry/exit, 17
entry/exit buzzers, 47
entry/exit time, 35, 36
forced arming, 54
latching system alarms, 68
lockout RAS on wrong codes, 47
no alarm group restriction assigned, 97
only using one key, 46
operation of alarm group restriction with arm/reset,
97
operation of alarm group restriction with timed
disarm, 96
operation of alarm group restriction with timed
disarm and arm/reset, 97
reset alarm without PIN code, 46
restrict to disarm, 53
restrict to reset only, 53
unlock door, 45
when using cards, 44
Alarms
A to B alarm delay (ACPO), 63
activate siren and strobe on system tamper, 68
auto reset, 79
auto reset time, 79
disable flashing area LED's, 70
display alarms immediately, 70
latching system alarms, 68
program local alarm reminder time, 62
reset latching system alarms, 52
reset without using PIN code, 46
silent alarms until fail to report, 71
Anti-mask event flag, 38
Area database, 35
A&B reporting (ACPO), 40
active event flag, 37
area name and number, 35
armed alarm event flag, 37
audio listen-in, 40
camera event flag, 38
disarmed alarm event flag, 37
disarmed event flag, 36
disarmed time, 39
entry time event flag, 38
entry/exit time, 35, 36
exit fault reporting, 40