System information

ATS 2000/3000/4000/4500 Programming manual 15
20.
HOW TO PROGRAM THE OPTIONS
!
For information on which keys to use while programming,
please refer to these pages:
Accessing the installer programming menu
The ATS system is programmed from the Installer programming menu. Before accessing
the programming menu, you must first disarm the system.
 How to disarm the system
1. Press 1122 (Manager PIN code) and then [OFF].
2. Press 0 and [ENTER].
 How to access the installer programming menu
1. Start with this LCD display:
2. Enter [MENU*] 1278 (Master
Engineer code) and press
[ENTER].
The following display appears:
3. Press 19 and [ENTER].
The following display appears:
4. Press [ENTER] to access the
Simple Menu (or press * to
access the Advanced Menu) The
following display appears:
You can now select the menu option you want to program. See page 179 for the
programming map that lists all the menu options available in the Programming menu.
 The chapter and section numbering in the manual follow the menu option
numbering. For example, Chapter 1 describes menu 1 “Zone database”.
There Are No Alarms In This Area
Code:
0- Exit, ENTER- Down, *- Up
0-Exit, Menu:
Installer Programming
0-Exit, Menu:
Simple/Advanced Menu
*-Advanced