System information

ATS2000/3000/4000/4500 Programming manual
146
Y
ES - Enable Time Update
* - Change 0 - Skip
Y
ES - Enable Text Insertion
* - Change 0 - Skip
Y
ES - Enable
A
larm Feedback
* - Change 0 - Skip
Y
ES - Enable History Search And Play
* - Change 0 - Skip
53.3. Enable Time Update
This feature will ensure that the time and date of the DVMR are synchronised
approximately every 60 seconds with the ATS panel. When performing video history
searches the time and date will be based upon the occurrence of ATS panel events.
YES The ATS panel time and date will be synchronised to the DVMRe.
NO
No time and date synchronisation will take place.
53.4. Enable Event Text Insertion
This option automatically inserts event text from the ATS panel (printer output) into
camera 1 text box of the DVMRe. This text will be associated with the footage recorded to
all cameras with that time stamp.
YES The ATS panel will insert the event text to the DVMRe text box.
NO
No event text insertion will take place.
53.5. Enable Alarm Feedback
The DVMR has the facility to issue user programmable strings on the occurrence of user
definable alarm conditions and motion detection. The strings will be sent out via the HLI
and received by the ATS panel. Based upon the content of the received strings after
processing, the ATS panel can manipulate zone inputs allowing alarm reporting and
control of various types to be performed.
YES The DVMRe will send out the user programmable strings on the occurrence of
pre-defined alarm condition.
NO
No alarm condition strings will be send out.
53.6. Enable History Search and Play
The ATS panel will have a new menu set added which will be used to emulate a subset of
the DVMR front panel controls. This feature will allow an ATS panel operator to view and
search recorded footage via the RAS. This feature will be used when the DVMR front
panels controls are not accessible and the panels RAS is located next to a spot monitor.
In addition to this, a Search And Play feature will also be supported. This will allow a user
to enter the history menu on the panel RAS and advance the DVMR playback to the
footage recorded at the point of the event occurring. Once the Search And Play
command has been issued to the DVMR, the RAS can display the DVMR RAS controls
so the user can control the payback if the option is selected.
YES Enables the associated RAS (see RAS Permission Flags) to search for and/or
play a particular footage.