System information

ATS 2000/3000/4000/4500 Programming manual 141
1
–
Inputs 2
–
Areas 3 - System
Option:
50. CHANNEL MAPPING
This is the 200 Baud FSK French communication option
50.1. Inputs
Each sub menu is broken down into group menus. For example,
50.1.1. Input group 1-16
Enter channel number 00- 99 for each input (zone). The defaults are:
Inputs 1-72 -> Channels 1-72.
Inputs 73-256 -> Channel 73.
50.2. Areas
Each sub menu is broken down into group menus. For example,
50.2.1. Area group 1 – 8
Enter channel number 00- 99 for each area. A separate channel can be programmed for
auto arm/disarm events. The defaults are:
Areas 1-16 -> Channels 74 - 89
50.3. System
Each sub menu is broken down into group menus. For example,
50.3.1. System group 1 – 10
The user can program a channel number, 00-99, for each of the available system
events.System events will be displayed as System Event 1 to System Event 40. A user
cross reference table will then be used to determine which event is System Event 1 etc.
The defaults are:
Event Name Channel
(Default)
Channel
Type
1 RAS Code_Attempts 00-99 (90) A
2 Courier In 00-99 (Dis) A
3 Guard Down 00-99 (Dis) A
4 Time Changed 00-99 (Dis) A
5 Auto Test Call 00-99 (Dis) A
6 Service In/Out 00-99 (Dis) A,R
7 Request Service 00-99 (Dis) A
8 Summary RAS Offline 00-99 (91) A,R
9 Summary DGP Offline 00-99 (91) A,R
10 DGP Reset 00-99 (Dis) A