System information

ATS 2000/3000/4000/4500 Programming manual 135
M1 Times for 0 Seconds
Time:
M 1 Activates Event Flag 0
*-Change, No:
M 1 = E0 Or E0 Or E0 Or E0
*-Chg, Input 1:
Option Function
On Pulse
Activates for the programmed time or the active period of the logic
result, whichever is the shortest.
On Timed
Activates for the programmed time regardless of the macro output
changing.
On Delay
Activates after the programmed time period unless the result of the
logic equation is no longer valid.
Off Delay
Follows the result of the logic equation, but remains active for the time
programmed after the result of the logic equation is no longer active
Latched
Activates on any of the first three macro inputs in the logic equation
and is only reset by the fourth macro input. Any programmed AND /
OR function is not used)
 How to program
Press one of these keypad buttons to:
[MENU*] Display a new output function.
0 Leave the Program macro logic menu
[ENTER] Save the displayed function and move to the next display.
35.1.2 Time
The time period (2 – 255 seconds) that is used when any of the timed macro output
functions is selected (pulse, on timed, on delay or off delay). Use any value of 2 or higher.
35.1.3 Macro output triggers event flag or
zone
Specify if the macro output should trigger an event flag or a zone and which event flag or
zone.
The macro output is triggered as a result of the logic equation on the macro inputs. The
output will behave as programmed in the Macro output function.
 How to program
Press one of these keypad buttons to:
? [ENTER] Enter and display new event flag or zone number. Enter the
same number twice to invert the macro output. It will now
trigger the event flag or output if the result of the equation is
not true. An inverted macro output is recognised by the
exclamation mark (!) preceding the number.
[MENU*] Select “Event Flag” or “Zone”.
[ENTER] Save the displayed details and move to the next display.
35.1.4 Macro inputs
Program up to four macro inputs (event flag or output numbers) and whether each of
those inputs performs an AND or an OR function in the logic equation.