System information

ATS2000/3000/4000/4500 Programming manual
132
Report Fail No Event Flag
Event Flag:
Report Fail (FTC) No Event Flag
Event Flag:
Testmode No Event Flag
Event Flag:
Keypad Buzzer No Event Flag
Event Flag:
A
ll Armed No Event Flag
Event Flag:
Dialer Active No Event Flag
Event Flag:
Ext Siren Test No Event Flag
Event Flag:
34.11. Report fail event flag
This event flag is activated when the ATS control panel fails to report to the central
station (also referred to as FTC).
See also Mains fail event flag.
34.12. Test mode event flag
This event flag is activated when the ATS panel is in test mode.
See also Mains fail event flag.
34.13. All armed event flag
This event flag is activated when all areas to report opening/closing are armed, there are
no alarm conditions, and no entry/exit timers are running.
See also Mains fail event flag.
34.14. Keypad buzzer event flag
When this event flag is activated, the keypad buzzers are activated. The event flag also
has to be assigned to the event(s) that you want the keypad buzzer to sound on.
See also Mains fail event flag.
34.15. Not in use
34.16. Not in use
34.17. Dialler active system event flag
This flag is active whenever a Dialler connection between the panel and CS is active.
34.18. External siren test event flag
This flag is active whenever a siren test is active.