System information
ATS2000/3000/4000/4500 Programming manual
13
Advanced set up
The above steps are required to set up any basic system. Items that are not required can
be skipped. Additionally the following items can be programmed:
1. In most cases assigning more then one area to a zone is used to program common
areas. For special common area functions like being able to only disarm the common
area, area linking is required. Program area linking using menu 19, Area linking.
2. When under certain conditions only restricted access should be available to users,
alarm group restrictions can be required. Program restrictions for alarm groups using
menu 15, Alarm group restrictions.
3. In case timed disarm is necessary to only allow disarming for a certain amount of
time, the disarmed time has to be programmed using menu 6, Timers.
4. For automatic arming/disarming program Auto arm/disarm in menu 17.
5. Program additional system options using menu 7, System options.
6. Program up/download facilities using menu 29, Computer connection.
7. If an extensive battery testing is required use program menu 31, Battery testing.
8. Program necessary system event flags using menu 34, Program system event flags.
9. If a printer is connected, program the printer settings using menu 30, Printer.
10. When outputs are required to activate Timezones program menu 22, Timezone to
follow output.
11. Program the necessary macro logic in menu 35, Program macro logic.
12. Program the custom LCD text in menu 32, Custom LCD message.
13. When areas in alarm should be reset automatically, program menu 8, Auto reset.
14. Program vault areas using menu 18, Areas assigned to vaults.
15. Program remote devices like the ATS1170 (one door RAS) or ATS1250 (four
door/four lift DGP) using menu 28, To Remote Devices.
16. Program the required system codes for access control using menu 20, System
codes.
17. Program the necessary door and floor groups using user menu 20, Door and Floor
Groups.
18. When zones should be shunted on access using access control devices like the
AST1170, program menu 21, Zone shunts.
19. Set the next service date (if required) in menu 33, Program next service.