System information

ATS 2000/3000/4000/4500 Programming manual 129
A
ritech, (*) - End
Aritech
Service Required at 0/0/0
Enter Day:
Routine Service Due, (*) - End
Routine Service Due
32. CUSTOM LCD MESSAGE
This records 32 characters of customised text that is displayed on the top line of LCD
arming station(s) in place of the normal display. Text is considered any configuration of
up to 32 characters. They can include numbers, spaces or punctuation.
Use the text option on the keypad to enter a
text of up to 32 characters. Keys 1 to 9 have
alphabetical characters printed above them.
To enter a letter, press the key the number of times relative to the position of the letter.
Both upper and lower case letters are available as well as numerical values and spaces.
See Figure 1: Keypad layout for entering text on page 90.
 When the [MENU*] key is used, only letters preceding the cursor are saved. If you
want to save an existing word, you must enter it again or, using the [ENTER] key,
move the cursor to the end of the word.
Time and Date can be displayed in the RAS LCD display if there are no alarms active. By
entering a point (
.) as the first character in Custom Message, the time and date will be
displayed in the following format: (HH:MM DAY/MONTH/YEAR)
For example: 8:45 02/10/2001
33. PROGRAM NEXT SERVICE
Program the date on which the next routine service call is due and the message is to be
displayed. The user will be prompted with a programmable text on the LCD arming
station(s) to call the installer.
33.1. Maintenance date
Enter the next date on which the user will get a text displayed to signal that service is
due.
33.2. Maintenance message
Program a text (32 character maximum) that will be displayed on the LCD arming
station(s) on the date specified as the service date.
 How to program
See Custom LCD message on page 129.