System information

ATS 2000/3000/4000/4500 Programming manual 127
Battery Testing: 1-Program, 2-Test
Option:
Batt Test Frequency - Disabled
*-Change, 0-Skip
Start Battery Test 00:00
Hours:
Run Battery Test For 000
Minutes:
No DGP Battery Testing In Progress
Press ENTER
31. BATTERY TESTING
The battery test records the details of the automatic battery test procedure and enables
manual battery test to be started. A battery disconnect check is also automatically
performed. If a battery is disconnected for more then 10 minutes, a warning will be given.
During the battery test, the control panel and/or DGP’s, and all auxiliary driven devices, are
powered from the battery. Devices are tested one at a time, making sure that not all devices
switch to battery test at once.
31.1. Select battery test program
Select 1 to program the battery test options or 2 to perform a manual battery test.
31.1.1. Battery test frequency
Specify how often the automatic battery test should be performed.
Use [MENU*] to select one of the available options:
• Disabled
• Every Working Day
• Every Monday
• First Monday of Mth
 Press 0 to move to Start battery test.
31.1.2. Start battery test
Program the time of day, in hours and minutes, when the battery test will start.
31.1.3. Battery test period
Program the period, in minutes, that the automatic battery test will run. If a battery test on
any device fails, that device immediately restores AC power.
31.2. Select battery test
31.2.1. Manual battery test
This allows the ATS panel and DGP batteries to be tested manually. This test does not
affect the automatic battery testing. If a DGP is tested, the DGP number will be displayed.