System information

ATS2000/3000/4000/4500 Programming manual
124
NO
–
Enable Real Time Printe
r
*-Change 0-Skip
NO
–
Answering Machine Defeat
*-Change 0 - Skip
NO
–
BELL Modem
*-Change 0 - Skip
29.16. Answering machine defeat
If the number of rings programmed and the number of calls is met, the next incoming call
will be answered immediately.
 See also Number of rings before answering and Number of calls before answering
29.17. Reserved
29.18. Use Bell 103 protocol
Enables BELL 103 modem tones for the PSTN or ISDN analogue line connection for
Computer reporting.
29.19. Connection type
Determines which dialler (on board PSTN or plug in ISDN) the panel will connect/report
to the computer.
0
PSTN
1 ISDN
2 Not Used
3 GSM
4 Universal Interface”
30. PRINTER
Program the details for the printer. To obtain a printer output from the ATS control panel, a
serial printer interface (ATS1802) or serial computer and printer interface (ATS1801) has to
be fitted.
30.1. Enable real-time printer
Enables the printer output to print in real-time.
YES Enable the printer port on the ATS control panel to print each event as it
happens. "Print History" can still be used, if required (see manager guide).
NO A printer is not connected or you do not require the printer to run in real time.
"Print History" must be used to obtain a print-out.
 Press 0 to leave Printer.
 Before anything will be printed real-time, either Print alarm events or Print access
control events has to be set to YES.