System information

ATS 2000/3000/4000/4500 Programming manual 123
Security Password 0000000000
Pass:
Computer Address: 0000
Address:
Connection Attempts 255, Failed 0
Attempts:
Number Of Rings: 0
Rings:
Number Of Calls Before Answer: 0
Calls:
*-Pause, Ph No:
Srv:
29.10. Service telephone number
Holds the telephone number to be dialled to set up a connection to a computer. The
service telephone number will be dialled if an user activates the option “Dial management
software”.
29.11. Computer address
Holds the address to identify the panel to a up/download software package.
 If not used, program “0”.
29.12. Security password
The ATS control panel requires a security password before granting access to the panel
using the upload/download PC software (e.g. ATS8100). A connection can be made
using a telephone line (dial-up) or using RS232, if the interface is available (ATS1801).
Security passwords are always 10 digits. The default password is 0000000000.
The ATS8100 up/download software can always connect to an ATS control panel with the
default password. However, it updates the password to the password programmed in the
up/download software for the ATS control panel currently opened.
29.13. Security attempts
Enter the number of attempts that can be made to set up a connection to a computer.
The number of attempt only increases if a connection to a modem is established, but no
correct security password has been received. The display also shows the number of
failed attempts.
29.14. Number of rings before
answering
Enter the number of rings before answering an incoming call. If set to 0, incoming calls
will not be answered at all.
29.15. Number of calls before
answering
Enter the number of calls before answering an incoming call. If set to 0, incoming calls
will not be answered at all. Each incoming call will have to exceed the number of rings,
set in Number of rings before answering.