System information

ATS2000/3000/4000/4500 Programming manual
120
Y
ES
–
Enable Remote Up/Download
*-Change 0 - Skip
No
–
Up/Download i
f
any Area Armed
*-Change 0 - Skip
29. COMPUTER CONNECTION
Holds programming concerning connection to a computer running software package to
program or control the ATS system (e.g. ATS8100).
 See also the “Service menu” in the manager’s guide.
When connecting the panel directly via the J18 (on-board RS232 port) or connecting the
panel via the ATS1801 computer/printer interface, it is not necessary to set menus 29.1
to 29.4.
When connecting the panel as a remote connection: via the on-board PSTN dialler or the
ISDN interface (ATS7100) (300 baud) or via a stand-alone ISDN or PSTN modem
connected to the ATS1801 computer / printer interface (4800 baud), at least Menu 29.1
needs to be set to ON.
 Every Advisor MASTER control panel has address ‘0’ as the default. When
operating in multi panel configurations with 2 or more panels (only applicable with
TITAN Security System Software) you have to set the corresponding panel
address in Menu 19.29.11: Computer Address.
To ensure optimum security, it is advisable to select the following options for menus 29.1
to 29.4:
Menu 29.1. YES
Menu 29.2. NO
Menu 29.3. NO
Menu 29.4. NO
29.1. Enable remote up/download
Specify if connecting to a remote computer is possible.
YES A remote connection (up/download) is possible.
NO Remote Up/Download is not possible.
 Set this option to YES to use menus 29.2 to 29.5.
 Press 0 to go directly to Menu 29.8
 Before commissioning a system, the Advisor MASTER Control panel must be
provided with a Security Password in Menu 19.29.12.
29.2. Up/Download if any Area Armed
 Option 29.1 must set to YES to use this option.