System information

ATS2000/3000/4000/4500 Programming manual
12
PROGRAMMING SEQUENCE
The ATS2000/3000/4000/4500 is a versatile control panel with many options to set up the
system with necessary requirements. When programming it is easy to lose track if one
does not use a good method. Using a good method also provides for an efficient way of
programming.
Basic set up
The basic set up involves all settings to put an ATS control panel with the most common
programming in operation.
1. Draw the floor plan and label all zones, equipment, areas etc. Use programming
sheets to fill out all information.
2. Default the control panel (see the quick installation & programming guide)
3. Change the Master Engineer Code using user menu 14, Program Users.
4. Set the correct time and date using user menu 15, Time and Date.
5. Program specific words that are not in the library using menu 10, Program text.
6. If any automatic procedure (like auto arm/disarm) is required or users only should
have access during certain periods, program timezones using menu 13, Timezones.
7. Program the area options like Area Names and entry/exit times using menu 2, Area
database.
8. Set up the required alarm groups using menu 5, Alarm groups.
9. Program the RAS connected. First activate polling. Then program the necessary
detail for any specific RAS using menu 3, RAS database.
10. When DGP are connected, activate polling and set the DGP type using menu 4,
DGP database.
11. Program the necessary zone details like zone type, zone name and reporting options
using menu 1, Zone database.
12. Program the dialler details using menu 9, Communication options.
13. Set the required reporting options using menu 42, Reporting Class Database.
14. Program the test call details using menu 43, Test Calls.
15. Program users in user menu 14, Program Users.
16. Map any event to outputs as required using menu 16, Event to output.