System information

ATS2000/3000/4000/4500 Programming manual
110
System Code 1: 004346
SysCode:
Card Offset 1: + 0
*-Chg, No:
System Code 2: 005678
SysCode:
20. SYSTEM CODES
The ATS control panels support up to two different system codes (sometimes also
referred to as "Site codes" or "Facility codes") for use with ATS1170 one-Door RAS. Each
system code also provides an option to offset the card ID for easier programming. The
system code is a unique code provided by Aritech.
 The ATS1250/1260 4-Door/4-Lift DGP does not require this setting to be
programmed in the control panel. Using the menu To Remote it is programmed in
the DGP. Also see the programming guide of the ATS 1250/1260.
20.1. System code 1
Enter the first system code here. The system code is provided by Aritech and is unique to
the reader device and card range
The system code normally has 6 digits. If less then 6 digits are provided, add leading
zeros.
20.2. Card offset 1
Specify the number to be added or subtracted from the actual card ID number, for cards
in System Code A. The ATS control panel will calculate the user number from:
User Number = CARD ID + (or -) card offset
The calculated user number is used for programming the user and when reporting events
to the central station or the computer.
For example:
The card offset is programmed as -5000. The actual physical card ID number is 5001.
The card will be programmed as User 1, and will report as User 1.
 How to program
Press one of these keypad buttons to:
[MENU*] Change the offset to + (add) or – (subtract).
? [ENTER] Enter the card offset required.
[ENTER] Save the displayed setting and move to the next display.
20.3. System code 2
Specify the second system code, if required. See System Code 1 for further information.